500 results in 0.1179 seconds.
-
Just my opinion but as clean as that looks you appear to be running lean as hell. You should be able to wipe your finger inside the end of the pipe and... -
the plates are/were not seated properly when installed. When you open it back up you will find the plates are loose in the basket. take the barrnett back...Leave a comment:
-
Warrior has a different head design and fuel injection. Our R*'s are cruisers with a lot of Tq. and 99-07 are carb, 08-up are FI.Leave a comment:
-
there is really not a rebuild kit. A can of carb cleaner will be needed but keep it off the rubber fuel bowl gasket. Some carb cleaners will make it swell...Leave a comment:
-
There is a fuse. Why do you think there is a fusable link?Leave a comment:
-
stop playing with it and take the carb apart clean it ,free up the idle adjuster(Knurled knob) and let us know what jets are in there. Tis will also give...Leave a comment:
-
good luck.lol...Leave a comment:
-
interesting to see a bearing that lives in a oil bath in that condition. -
if he gets a side load bearing he better make sure its install the right way. -
It's not supposed to settle in the bottom. I've always found it still in place around the tire. In fact I have even scraped it out of the old tire and...Leave a comment:
-
or a bullet in the ass if they caught you.
Leave a comment:
-
message me if you would like to purchase a setLeave a comment:
-
get the battery check and clean tighten all connections. You might even want to take the starter apart and clean out the carbon dust, clean the commutator...Leave a comment:
-
Listen to Mort, The pump bracket can be removed but leave the motor mount bracket that goes from the frame to the engine....Leave a comment:
Leave a comment: