I've made a couple of changes that seem to have made at least one immediate difference.
1) Dropped the needle by moving the clip back to the 3rd...
50 results in 0.0195 seconds.
-
Davej,
Thanks for clearing that up. And that explains why, with my previous jetting using the 35 pilot jet, the bike had a hesitation right off...Leave a comment:
-
Brianmac, I understand that each bike is different. But I only have one and since going pumpless in '07, I know without a doubt that when I switch to...Leave a comment:
-
Choke cable along with the plunger were replaced. If it weren't seating, I would be smelling unburnt fuel, especially at idle, but I'm not.
...Leave a comment:
-
Reset my trip meter with every fill-up, then when I have to switch to reserve, divide the mileage by 4 (because I've run through 4 gallons of gas) to...Leave a comment:
-
2005 Silverado
AIS and fuel pump removed 2.5 Suzuki needle valve (to run pumpless)
Dynojet needle
Max Air PMS
Ported manifold...Leave a comment:
-
Pilot Jet Issue?
This past spring I changed pipes (one aftermarket brand to another, so the carb had already been rejetted), but rejetted again per recommendations here.... -
This won't be much help, but I'm on my second pair of OEM grips. I just like the way they feel.Leave a comment:
-
Haven't been in the rain yet, but I've washed the bike with no issues. It's advertised as "waterproof" and the back is completely sealed with...Leave a comment:
-
I've had the bike for 16 years now and what I always considered to be a "too fast" idle, just going by the sound, seems to be just about right....Leave a comment:
-
Davej,
That's what's kind of weird. There was quite a bit of black carbon(?) on the tip but I wiped it off, then went for a 2-3 hour ride with...Leave a comment:
-
I took a square electrical junction box cover, cut out the size I needed, then bent it. Then I notched out a spot for it to mount on the left mirror...
Leave a comment:
-
Shotround,
These pipes are pretty respectable. They definitely don't have the bark and aren't as loud as the Hard Krome pipes I took off. I guess...Leave a comment:
-
I just went through the same thing and ended up getting a Hardline inductive tachometer. It was super easy to install and seems to be pretty accurate....
Leave a comment:
-
Another Exhaust Question
I recently installed a set of Cobra 2-into-1 pipes with the chrome end tip and that tip is now turning a kind of gold color. Is that normal? The pipes...
Leave a comment: