From Spring Branch, Texas
where about from Wi?
SbTx_Rider
Last Activity: 4 minutes ago
Joined: 03-18-2017
Location: Spring Branch, Texas
-
From Spring Branch, Texas
where about from Wi? -
I used the AIS bracket and modified it to mount the horn.
This allowed it to be inset a little...Leave a comment:
-
I replaced all of the turn signal screws with button Allen screws. Picked them up at a local supply store for less than 2 bucks. The button was slightly...Leave a comment:
-
Just got it! LOL!
I had an old farts moment!Leave a comment:
-
I have both a Yamaha and a clymer'sLeave a comment:
-
Thanks Questcap and all.
I ordered one from amazon.
Worked great.Leave a comment:
-
Leave a comment:
-
Sounds like accelerator pump issues to me.
Slow throttle up ok, but when he guns it, it falls flatLeave a comment:
-
Congrats!
Your persistence has paid off!...Leave a comment:
-
From Spring Branch, TexasLeave a comment:
-
Congrats!
Blessings to all!Leave a comment:
-
I agree with davej.
The only way push rods come out is by being bent. Then you have bent valves, holes in pistons, etc
If the cam flattened,...Leave a comment:
-
Requires saddlebag mounts STR-4WM73-40-10
This has the extra hole for mounting ...Leave a comment:
-
From Spring Branch, TexasLeave a comment:
-
If it turns over normally, has compression, spark and fuel, it should start.
Is the spark a good strong spark?
If yes, it would have to be...Leave a comment:
-
When it spins over, was it a "Normal" sound of cranking over, or was it faster. If you had no compression, it would spin over fast.Leave a comment:
-
"I asked him if perhaps the decompression solenoid could be stuck open. He wondered the same thing and wanted to check with Yamaha corporate to see... -
After doing a lot of research on the different types of stems, I settled on the Show Chrome stems.
https://www.amazon.com/gp/product/B0....Leave a comment:
-
Ok, my thoughts.
I doubt coils would be bad. You have 2. If one was bad, the other should still work.
How does it die? Does it loose...Leave a comment:
-
Leave a comment:
No activity results to display
Leave a comment: