Tykes_Place
Admin
Last Activity: 19 hours ago
Joined: 05-28-2010
Location: Helena, MT
-
I’m back to report that after some riding I’m getting more comfortable with this gearing setup. I will sheepishly admit that when I was seeing what...Last edited by Tykes_Place; 1 day ago. -
I don’t know if anything was ruined. But the straps are on the bars and that’s all that’s holding the bike down and upright. To keep it from falling...Leave a comment:
-
Right. Lance’s bike. -
How to not strap down a bike
This is for sale on FB marketplace. https://www.facebook.com/groups/1003...69806623067442
It hurts to see how it’s tied down. Enough that...Last edited by Tykes_Place; 4 days ago. -
What the hell dude? The air cleaner isn't covered??? -
Now that you mention it I was noticing a slight high-pitched noise on acceleration yesterday. Maybe it was the rollers....Leave a comment:
-
Maybe my rollers are worn. They fit fine....Leave a comment:
-
I just switched. No intermediate changes. -
My thoughts on the 33/65 gears
Just did my shakedown run after swapping the gears. Belt is 128t. I’m not sure what to think yet. Keep in mind I’m on a car tire that’s taller than...
-
Modifying the pulley was actually pretty easy. I used a carbide flush router bit and machined the smaller opening to match the larger. Then I drilled...Leave a comment:
-
The inner is stepped. The larger opening is about 0.5mm bigger than the opening on the stock pulley. And that is about 0.5mm bigger than the hub. So it...Leave a comment:
-
This is just embarrassing. I bought the rear pulley 7 1/2 years ago.
Even worse, it doesn’t fit. I never compared it. The center hole is...Last edited by Tykes_Place; 4 weeks ago.Leave a comment:
-
Yep. All the way around the threads. If this let’s go then I give up. Might get an Indian or something....Leave a comment:
-
Take that pulley nut! Plus 33/65 pulleys and 128t belt installed.
Try coming loose now you bastard!
I’m finally installing my 33/65 pulleys and of course the nut was starting to back off. Again! I was...
No activity results to display
Leave a comment: