Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
I took a square electrical junction box cover, cut out the size I needed, then bent it. Then I notched out a spot for it to mount on the left mirror...
-
Shotround,
These pipes are pretty respectable. They definitely don't have the bark and aren't as loud as the Hard Krome pipes I took off. I guess...
Leave a comment:
-
I just went through the same thing and ended up getting a Hardline inductive tachometer. It was super easy to install and seems to be pretty accurate....
- 1 like
Leave a comment:
-
Another Exhaust Question
I recently installed a set of Cobra 2-into-1 pipes with the chrome end tip and that tip is now turning a kind of gold color. Is that normal? The pipes...
-
-
RPM Question
I recently installed an inexpensive inductive tachometer for tuning purposes but decided to leave it on the bike. Since then, due to a leaking brake...
-
Looking at the pics of the bike, it looks like you have OEM bags, but if it's got locking hardware, ditto what Shores said. Definitely not stock har...
Leave a comment:
-
Welcome to the Clinic and to the Road Star!!
Regarding the heel-toe shifter, it's on a splined shaft so it is adjustable, but it's all one...
Leave a comment:
-
Yes, I'm replacing the pads. EBC Organic. Been using them for years.
Replaced the rear brake line 3 years ago with the black stainless...
- 1 like
Leave a comment:
-
Got the pistons out and in the process of cleaning the caliper but there is a lot of crusted on grime in and around the o-ring and seal grooves. Since...
Leave a comment:
-
Yes, All Balls does have kits on eBay.
And thanks for the tips!
Leave a comment:
-
Yeah, doesn't look too bad to rebuild. Already got it off the bike and looking at rebuild kits. Any certain (brand) kit to stay away from?
Leave a comment:
-
Brake Caliper Leaking
When it rains, it pours!!! Finally got the bike running the way it should, now the rear brake caliper is leaking....
-
Ratl,
I think my main issue wasn't having the idle rpms set correctly. Since installing the tach and setting my idle, the bike is back to running...
Leave a comment:
-
And it was super easy to install. Just coiled the lead wire around around the spark plug wire 5-6 times, zip tied it in place and just like that you've...
Leave a comment:
-
Yes, I pulled them after my last post. They were all in good shape with no signs of fouling. Regapped them then went for about a two hour ride, stopping...
Leave a comment:
-
Forgot to mention that before installing the tach, I did check for intake and exhaust leaks and for any sign of sticky valves and everything checked out...
Leave a comment:
-
Update.......
Well, part of the problem was me. Or maybe I was the entire problem!! As it turns out, my senses aren't as calibrated as I thought....
Leave a comment:
-
Thanks for all the input and suggestions. I'll definitely check for intake and exhaust leaks first then go from there. In the mean time I'll have to...
Leave a comment:
-
Yeah, I've had the bike since 2006 and it's definitely cold-blooded, but not like this. This just started since re-rejetting the carb and installing...
Leave a comment:
No activity results to display
Show More
Leave a comment: