if the battery is over 5 five years old. might as well get a replacement.
i also thought carb puke was solved by going pumpless or turning...
Shotround
Last Activity: 21 minutes ago
Joined: 03-31-2021
Location: Dfw
-
take battery to an auto parts store. they have the good stuff to test the battery. next, clean the carb. make sure pms hasnt backed out.Leave a comment:
-
2.5 on pms is too much. I went through the same experience you did with the plugs. Got fed up went the other way to 1.5 turns and it ran and ran but was...Leave a comment:
-
totally missed out on getting the grizzly seat. it would have came with a new oring.
at least its working again.Leave a comment:
-
My tank vent is rusted shut. Thus requiring me to vent via fuel cap. Yes, mine is blocked at the tank, not at the rollover valve.
If there... -
What’s the next objective?Leave a comment:
-
M14 x 1.25 or M14 x 1.5?
Leave a comment:
-
any chance they got the pms screw, spring, washer and oring in the wrong order? better yet, did they really clean it out? i had that bog a time or two....Leave a comment:
-
I got a 300cc scooter in 2021. What a blast. I ride that thing nearly at wot all the time. Surprised it hasn’t blown a gasket yet. It won’t get 40mpg...Leave a comment:
-
1) I installed the crab and when I went to start the bike the crab pissed fuel every where (From the jets, not the fuel line) and then backfired which...Leave a comment:
-
leaking oring at float needle seat? maybe they bumped the float tang. check float level.Leave a comment:
-
theyre gonna ask about air filter and exhaust too.Leave a comment:
-
standard response yer gonna get from the others when they get back online.....what jets are in it and how many turns on pms. what needle too. did ya...Leave a comment:
-
i believe thats the normal shapeLeave a comment:
-
Is there anything that needs to be greased on the back end while it’s opened?Leave a comment:
No activity results to display
Leave a comment: