Kmartcivic
Last Activity: 2 days ago
Joined: 10-27-2020
Location: Rockledge, FL
-
Pump could be flowing but if the fuel pressure regulator took a crap then if won't build any pressure. No pressure no spray from fuel injectors. -
Oh I bet he doesn't!!!!
Leave a comment:
-
...
Leave a comment:
-
First off, do you have any freeplay in your clutch lever? If so check the cablle adjustent.
Distance between Pull lever and Clutch cable...Leave a comment:
-
AHHHH its too early at work! haha! I look parts up all day and totaly didnt realize I was looking at the wrong shaft. I was looking at the one below...
Leave a comment:
-
Harley lowers for audio on 1600? Do years matter?
I am starting to piece together everything I need to add some tunes on my 00 1600. I've seen the small picture on here of Smokescreens bike with the... -
Like Brad_G says, Im sure the 00-03 model will work. The pulley is the same from 99-03 but of course the shaft that the pulley bolts to doesn't show...Leave a comment:
-
Sounds like your clutch cable is not adjusted properly.,Leave a comment:
-
Have you tried bench testing the lights to a battery? Maybe the colors are incorrect and you have a ground flipped with the turn signal wire. Or something...Leave a comment:
-
I had that issue after rebuilding my Master Cylinder. What I did was, take off brake hose off master cylinder. Pull lever, place thumb or finger over...Leave a comment:
-
Kmartcivic commented on 129drifter's to Is there a readily available correct transfer gear drive lube?in Bike TalkYour welcome! -
Yamaha superceeded the part # for the transfer case oil. It is ACC-SHAFT-PL-32 Friction Modified Shaft Drive Oil SAE 80W-90Leave a comment:
No activity results to display
Leave a comment: