Flashback
Last Activity: 4 hours ago
Joined: 07-15-2007
Location: Spring City TN
-
I took a 50 mile spin through the hills yesterday, all was good.! I have read that the ECU will kill the spark to the rear cylinder when the limit is... -
Yes it is.. Again thanks for the diagram, I fiddled with so many different things I can't really say why it's working but at least I was able to check... -
It's running, I didn't get a new ECM but cleaned the pins in the it, clipped spark plug wires, and repaired a loose ground wire going to the TPS. so I...Leave a comment:
-
When I dropped a tooth on the drive pulley I needed a bit more rpm. It gives a bit more time to shift, if you're a freeway rider I don't see any help...Leave a comment:
-
I've tested the coil trigger wire in the harness, thanks davej for the diagram, and it has continuity. Since the front cylinder will fire I'm wondering...Leave a comment:
-
I tested the secondary winding in the coil and it's around 38k which is way high but I didn't remove the spark caps so I think the secondary is good....Leave a comment:
-
...
Leave a comment:
-
Thank you sir! That gives me some direction. At least I won't be skinning wires. I gave my stock ECM to a fellow member years ago. Maybe not the best...Leave a comment:
-
Thanks Dave, I did remove the ecu as I wanted to check the pins, plug wires etc. I didn't find any corrosion or bent pins and the plugs looked good as...Leave a comment:
-
I did, + and - show 11.94 volts and compare with the front cylinder which is firing. I also compared olms and it matched the working coil. electrics is... -
thanks for asking. I'm in Tennessee good ole USA and the star is a 2003 1600.. I pretty much worked my way down the list and suspect that it may be the...Leave a comment:
-
No ignition on rear cylinder
Hey folks long time since I've posted tho I visit every day. The damn RS is so reliable I've not had to tinker but she has bitten me. I lost juice to...
No activity results to display
Leave a comment: