Announcement

Collapse
No announcement yet.

EBC spring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • EBC spring

    Does anybody have the correct part numbers for the EBC spring and the gasket I would need when replacing the spring. Is the spring and gasket all I need. 2007 Road Star Midnight Silverado with 33K. Clutch just starting to slip a little in higher gears. Thanks for the help!

  • #2
    I don't have that number but did you see the Barrnett style clutch spring I posted on another thread?
    https://www.roadstarclinic.com/forum...utch-on-amazon

    Comment


    • #3
      Dave I just looked at the Barrnett style clutch spring. No reviews? What are your thoughts? I'm wondering about the quality and the bearing?

      Comment


      • #4
        I don't think the bearing is any different than any other Chinese bearing that is used on about everything we buy that has a bearing in it. If you have a concern about the bearing a different bearing can be purchased to install for about $10 or less. Unless you buy a brand specific bearing such as Timken the bearings that we put in the steering head and wheels are likely no more than a Chinese bearing.Also keep in mind it is an oil bath lubed bearing so not much likelihood of it going bad due to lack of lube like a steering head or wheel bearing. If I needed a clutch spring and was considering a OEM or EBC due to finances I would buy /try this one instead for just a couple bucks more. JMO

        Comment


        • #5
          “Also keep in mind it is an oil bath lubed bearing....”

          Just an observation, but I wonder why it’s shielded on both sides?

          Comment


          • davej
            davej commented
            Editing a comment
            What is it shielded with? If you are talking about the cover it has slots cut in it all the way around the bearing to allow lube into the bearing. Just guessing but maybe the cover also holds oil inside to keep it from slinging out with centrifical force.

        • #6
          I was commenting on the clutch you linked on Amazon.

          They look to be stamped tin shields.

          Comment


          • davej
            davej commented
            Editing a comment
            The shield looks like it has holes in it all the way around for oil to enter

        • #7
          On the Barnett it is not entirely closed off. The OEM plate has the bearings fully exposed. Too bad I cannot post pics anymore dang it.

          Comment


          • Bikerron
            Bikerron commented
            Editing a comment
            I’m fresh out of picture credits, myself.

          • davej
            davej commented
            Editing a comment
            so am I

        • #8
          EBC Brakes CSK906 Diaphragm Type Clutch Spring

          Here is an Amazon link.

          https://www.amazon.com/gp/product/B0...UBCLUQU5&psc=1

          Comment


          • #9
            I wouldn't buy that one simply because when you read the description you don't know if you are buying brake pads or a clutch spring as the pic shows. The description describes brake pads.

            Comment


            • #10
              When EBC first released their clutch spring for the R/S, I had a M/C service & repair shop.I had used EBC brake components frequently always with good results.
              I installed their springs in 3 Roadies that belonged to personal friends. That was in 2011 (if I remember correctly). All three of those scooters are still on the road with those EBC springs still performing as designed.
              As for my own '00 R/S HotRod, I went with the OE spring for a Warrior. Still doing burnouts on that spring.
              I love the smell of smoked pork in the morning !

              Comment


              • #11
                Originally posted by Chromepony View Post
                Still doing burnouts on that spring.
                He needs one.

                 

                Comment


                • Bikerron
                  Bikerron commented
                  Editing a comment
                  Poor guy wasted a whole beer on that fail, too. Lol

                • roadiemort
                  roadiemort commented
                  Editing a comment
                  Linked brakes?

                • Chromepony
                  Chromepony commented
                  Editing a comment
                  What a turd !

              • #12
                That's pretty Sad

                Comment


                • #13
                  Sad indeed!

                  Comment


                  • #14
                    NCB, I don't have that EBC spring number, but if you're here in the States, they're easily obtained off eBay for right about $52. I bought mine from there, and it was the cure to my slipping clutch some 3 years ago. I didn't use a new gasket either, I just used a gasket making material in a tube according to the directions, and it sealed perfectly.

                    Comment


                    • #15
                      Originally posted by Questcap View Post
                      NCB, I don't have that EBC spring number, but if you're here in the States, they're easily obtained off eBay for right about $52. I bought mine from there, and it was the cure to my slipping clutch some 3 years ago. I didn't use a new gasket either, I just used a gasket making material in a tube according to the directions, and it sealed perfectly.
                      Thanks

                      Comment

                      Latest Posts

                      Collapse

                      Topics Statistics Last Post
                      Started by Squirts, 1 day ago
                      12 responses
                      98 views
                      0 likes
                      Last Post Jclevesque  
                      Started by Jon D, 2 hours ago
                      5 responses
                      23 views
                      0 likes
                      Last Post Jon D
                      by Jon D
                       
                      Started by viper, 1 day ago
                      6 responses
                      79 views
                      0 likes
                      Last Post Brad_G
                      by Brad_G
                       
                      Started by Tykes_Place, 1 day ago
                      31 responses
                      220 views
                      0 likes
                      Last Post Duke
                      by Duke
                       
                      Started by Jon D, 17 hours ago
                      7 responses
                      61 views
                      0 likes
                      Last Post Jon D
                      by Jon D
                       
                      Started by scotcher65, 5 hours ago
                      2 responses
                      29 views
                      0 likes
                      Last Post Brad_G
                      by Brad_G
                       
                      Started by hardone2get, 17 hours ago
                      2 responses
                      48 views
                      0 likes
                      Last Post davej
                      by davej
                       
                      Started by Blackcloud12, 1 week ago
                      9 responses
                      128 views
                      2 likes
                      Last Post Lug Nut
                      by Lug Nut
                       
                      Started by Andrew, 02-25-2018, 09:53 AM
                      22 responses
                      3,991 views
                      0 likes
                      Last Post Lug Nut
                      by Lug Nut
                       
                      Started by a_gunslinger, 1 week ago
                      34 responses
                      534 views
                      0 likes
                      Last Post texasscott1  
                      Started by boomerA, 1 week ago
                      21 responses
                      275 views
                      0 likes
                      Last Post Lug Nut
                      by Lug Nut
                       
                      Started by DEEPHATE, 2 weeks ago
                      18 responses
                      190 views
                      0 likes
                      Last Post Lug Nut
                      by Lug Nut
                       
                      Started by Lyndon53, 2 days ago
                      2 responses
                      70 views
                      0 likes
                      Last Post Horsehammerr  
                      Started by J89k, 3 days ago
                      23 responses
                      258 views
                      0 likes
                      Last Post brianmac  
                      Started by roadiemort, 06-16-2020, 10:30 AM
                      27 responses
                      475 views
                      0 likes
                      Last Post roadiemort  
                      Started by Jaybo, 02-08-2020, 05:54 PM
                      314 responses
                      3,798 views
                      3 likes
                      Last Post Lug Nut
                      by Lug Nut
                       
                      Started by AR. Hillbilly, 02-01-2020, 10:31 AM
                      22 responses
                      289 views
                      1 like
                      Last Post catnaper2  
                      Started by Kevin Di, 3 days ago
                      17 responses
                      181 views
                      0 likes
                      Last Post Kevin Di  
                      Started by Jaybo, 2 days ago
                      15 responses
                      128 views
                      3 likes
                      Last Post Lug Nut
                      by Lug Nut
                       
                      Started by Overkill jones, 08-25-2018, 09:02 PM
                      7 responses
                      611 views
                      0 likes
                      Last Post brianmac  
                      Working...
                      X