Announcement

Collapse
No announcement yet.

PMS turns out?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PMS turns out?

    I have exhaust style that is new to me.
    They are the long shot exhaust and the exhaust lengths are the same.
    No markings of the brand anywhere.
    How many turns out with stock air filter? Click image for larger version  Name:	start-up-day-9.jpg Views:	1 Size:	110.2 KB ID:	76342
    Any recommendations?
    I have run it two times and have just guessed at the PMS setting. Thanks everyone.
    I ran it without the air filter so I could reach the PMS thumb screw.

  • #2
    If you are using the stock jetting,air cleaner,pilot jet start at about 3 turns out and tweak it from there. You will never get it to run properly with the air cleaner off the bike. You need to put it back on to check if adjustment is correct

    Comment


    • Lucky
      Lucky commented
      Editing a comment
      Got it. Thanks for that info. I just ran it again after taking a mirror and counting the turns out.
      It was just slightly over 3 turns out. With the air filter in place it should be good.

  • #3
    You said "thumb screw" so I'm assuming you have the Baron's pilot mixture screw, if so, get yourself a 10" piece of fuel line and slip one end over the thumb screw, *lightly* zip tie the other end so it doesn't fall off. Then you can just reach down and make adjustments while on the bike.

    When the bike is fully *hot* and idling, dial the PMS out about 3.5 turns, then slowly dial it back in until you hear the RPMs drop. When they drop, stop, and dial the PMS back out about a quarter turn and leave it. It should be between 2.25 and 3.25 turns.

    Comment


    • Lucky
      Lucky commented
      Editing a comment
      Yes- it is the Barons thumb screw. Bought that right in the beginning. Good product.
      I just ran it again after taking a mirror and counting the turns out.
      I had put an easy to read mark on the screw.
      It was just over 3 turns out. With the air filter in place it should be good.
      I think it was about 3.5 turns out. Maybe almost 4 but with the air filter 3.5 should work.

      It takes about 2 minutes for it to warm up.

      Thanks for the help!

Latest Posts

Collapse

Topics Statistics Last Post
Started by Blackcloud12, 02-25-2020, 05:10 PM
9 responses
98 views
0 likes
Last Post Swampy
by Swampy
 
Started by Swampy, 5 hours ago
5 responses
13 views
0 likes
Last Post Ahodge75  
Started by DEEPHATE, 13 hours ago
13 responses
79 views
0 likes
Last Post 07 silverado  
Started by roadiemort, 2 weeks ago
13 responses
278 views
0 likes
Last Post roadiemort  
Started by RTT, 19 hours ago
12 responses
67 views
0 likes
Last Post RTT
by RTT
 
Started by Mic39, 1 day ago
13 responses
95 views
0 likes
Last Post Bikerron  
Started by scartozi, 2 days ago
15 responses
142 views
0 likes
Last Post Duke
by Duke
 
Started by Road Star Charlie, 05-22-2019, 04:21 PM
8 responses
291 views
0 likes
Last Post Road Star Charlie  
Started by Road Star Charlie, 09-02-2019, 07:59 PM
5 responses
183 views
0 likes
Last Post Road Star Charlie  
Started by Road Star Charlie, 01-14-2020, 03:53 PM
3 responses
67 views
0 likes
Last Post Road Star Charlie  
Started by Ledan, 6 days ago
26 responses
244 views
0 likes
Last Post Cheezhead  
Started by Jaybo, 02-08-2020, 05:54 PM
97 responses
1,470 views
3 likes
Last Post MikeyC
by MikeyC
 
Started by Father Pobasturd, 2 weeks ago
15 responses
218 views
0 likes
Last Post Father Pobasturd  
Started by Smokescreens, 1 week ago
27 responses
466 views
0 likes
Last Post Smokescreens  
Started by Overkill jones, 08-14-2019, 09:15 AM
37 responses
773 views
0 likes
Last Post Lug Nut
by Lug Nut
 
Started by iamthelaw270, 2 days ago
4 responses
45 views
0 likes
Last Post texasscott1  
Started by 07 silverado, 1 day ago
3 responses
51 views
0 likes
Last Post 07 silverado  
Started by byfert, 1 day ago
3 responses
77 views
0 likes
Last Post Bikerron  
Started by psychoal, 2 days ago
9 responses
114 views
0 likes
Last Post Shores
by Shores
 
Started by brianmac, 03-25-2020, 08:46 AM
24 responses
305 views
0 likes
Last Post Father Pobasturd  
Working...
X