Light upgrades/ rubbing locations

[Timmay]

Hi I have a 1999 roadstar 1600. I'm having an intermittant issue with blowing a fuse on the right turn signal circuit. Any common areas to rub thru? Also, who's done upgrades for beamer lights and head lights? I'm looking for opinions on both LED systems which I've gotten feedback to stay away (also giving issues with flasher units) but the low voltage factor interests me. I'd also consider HEI etc if there is something reasonable out there..... any experiences? I'm in Canada would prefer to purchase online or locally rather than ship from US if possible.
Thanks

[davej]

If you have passing lamps check the wires where they come into/out of the tube.

[Chromepony]

from Athens, Ga.
Electrical gremlins are just a straight pain in the shorts. Nothing to do but get up in there & root around 'till you find what's causing the problem.
Good luck with all that !

[RonZee]

That was part of me quitting working on cars. Too many friggin electrical problems and I don't fit under dashboards so good. But as stated above, the only thing I can suggest is starting at the light itself, work your way back along the wiring all the way back to the switch and beyond if need be. Sooner or later, you'll find it.