Tweet
I have a 2003 Midnight with 27500 miles. I went to start it up after it sat for 2 years and it started just fine and ran for about a minute or two. I was changing oil so just warming up. I shut it off started the change and when I tried to fire it up again the starter just wirled. Replaced the battery and the starter relay and the starter and the new just wirls like the old. Checked the wires and both the starter to relay and the relay to battery read 0.00 ohms. I locktited the bolt on the flywheel so I know it is good. The bindex just will not engage. Anyone have any ideas. I am at wits end. Thanks, Reddog3979
| Topics | Statistics | Last Post | ||
|---|---|---|---|---|
|
15 responses
101 views
0 likes
|
by Shores
|
|||
|
665 responses
4,545 views
2 likes
|
by LDofDC
|
|||
|
12 responses
162 views
1 like
|
|
|||
|
0 responses
15 views
0 likes
|
|
|||
|
17 responses
185 views
0 likes
|
by davej
|
|||
|
3 responses
53 views
2 likes
|
by GreenMachine
|
|||
|
1,508 responses
18,068 views
2 likes
|
by Zimasfriend
|
|||
|
6 responses
73 views
0 likes
|
by Kmartcivic
|
|||
|
17 responses
175 views
2 likes
|
by Duke
|
|||
|
14 responses
163 views
1 like
|
by Shores
|
|||
|
3 responses
52 views
0 likes
|
by FuryGuy
|
|||
|
48 responses
546 views
0 likes
|
by Shores
|
|||
|
28 responses
446 views
0 likes
|
by Dogbone
|
|||
|
17 responses
121 views
0 likes
|
by Kmartcivic
|
|||
|
1 response
61 views
1 like
|
by roadiemort
|
|||
|
10 responses
88 views
0 likes
|
by mlharper
|
|||
|
5 responses
105 views
5 likes
|
|
|||
|
11 responses
91 views
2 likes
|
by Zimasfriend
|
|||
|
2 responses
60 views
0 likes
|
by Flashback
|
|||
|
25 responses
465 views
0 likes
|
by Shores
|
Comment