Fuel Pump Cover; Screw Sizes?; 2006 Road Star Silverado 1700

[ebaleytherogue]

Does anyone know what size the two screws are, that afix the stock fuel pump cover? I removed it, at the beginning of last season, and someone threw the screws away. I'm referring to the screws that enter the cover, from the bottom, and recess into the rubber receivers on the mount. I want to run to Home Depot and pick a couple up, because this $1 investment has kept me from using the cover for an entire season. Thanks, folks.

[roadiemort]

#67 Yamaha calls it a nut. https://www.yamahasportsplaza.com/oe...25bf/fuel-tank

[JJansen]

Does anyone know the part number or possible replacement for the rubber receivers on the mount. Mine completely disintegrated. Thank you

[Shores]

Does anyone know the part number or possible replacement for the rubber receivers on the mount. Mine completely disintegrated. Thank you

Go to the Yamaha website and click on the parts tab. Then go into the motorcycle tab, then the year tab, then the model tab and then the specific parts diagram with part numbers

[JJansen]

Thank you

[andyl]

The screw you are looking for is 98507-05016-00 - SCREW, PAN HEAD.

[Lug Nut]

That is another good reason to fuel pump delete. Spend $40 on a grizzly needle valve and a little bit of money on fuel line and a small filter and don't have to worry about the pump, the rubber, the screws, the plastic chrome housing, etc

[roadiemort]

Nobody's worried, post from 2019, OP hasn't been here since then.