Brake pedal and shifter

[Pietdriver]

I’m not happy with how my brake pedal and shifter are arranged. I have some mobility issues with my left foot and would like to have the shifter longer in both directions as well as both ends lower. Do I have to make my own? I also heard that someone on this group sells a brack bracket? The bike is an 04.

[Mr. Miyagi]

I have an 09 and the shifter is two piece, you can adjust front or back independent of the other to your hearts desire. I have the front high enough that I can slip a toe under it and the rear very low so it's easy to get to. I was laid up for most of last year with me knee and I can shift. The mechanic at the motorcyle shop I use has commented on how easy it is to shift my bike, his words are, it's right there right where it needs to be.

[Lug Nut]

Roadliner shifter is larger and 2 piece

[Shores]

You can use the linkage on both pedals to raise or lower them but there's no way to lengthen them. Raise them for big shoes, lower them for little wimpy shoes!

[Pietdriver]

Bought a used shifter and will use it to cut and weld up a custom unit that should fill my needs, I’ll post as I go.

[Duke]

That's the way to do it!

[Brad_G]

Please do. It's always interesting to see what others design and build.

[Chooch]

Here’s an idea if you need to move your brake pedal forward. I used a mill to fabricate an extension. I cut the lever so I could leave the pedal stock and welded the extension at the stock angle.

[Pietdriver]

I really like how you did that. I’m also looking to lower it as well. I just have to wait till I install my new Lindby bar.