Clutch cable clamps

[Jokke75]

I’m trying to install an engine guard and it seems it would be good to change the stock cable clamps (plastic ones) holding the clutch cable to the front of frame. Any ideas or suggestions where to look for new clamps that would leave more room between the frame and the clutch cable? Thanks!

[roadiemort]

https://www.google.com/search?rlz=1C...w=1499&bih=929

[Lug Nut]

Stock for custom long SS clutch cable is just fine... Don't want to try and "shape" it too much or hold it too stiff.

Custom clamps on right side for throttle and brake lines

[Jokke75]

Thanks, guys. Makes sense to change them to totally different ones, I was just wondering if there would be some cheaper plastic ones, like the stock clamps, available so could move the cable further away from the vertical frame tube but for sure it’s better looking with new metal clamps.

[Shores]

To chrome or black wire ties per clamp. One snugly around the frame and the other through the first wire tie and loosely around the cable.