WTB Cast Rear Wheel for 99 Road* Silverado

[tovarman2]

Just bought a front wheel now need the cast rear. Please. Thank you. 1999 Yamaha Roadstar Silverado. Want to go tubeless.

[Lug Nut]

Info for doing the swap





The toothed part of the pulley stays with bike. The pulley hubs can be swapped with the wheels and all would be good.

The roller bearing in the hub is the only thing that needs changed. The spacers on the outside are the same.

The only issue is the mushroom head the 1600 pulley roller bearing has.
The 1700 pulley roller bearing doesnt have this built in spacer.

[tovarman2]

So. A 1700 cast wheel will fit my Road* by just swapping the pulley roller bearing from the 1600 wheel...?

[Lug Nut]

So. A 1700 cast wheel will fit my Road* by just swapping the pulley roller bearing from the 1600 wheel...?

Yup...now remember.... The pulley for 99-03 is 1.5 in wide (and belt) and 04+ is 1.25 in wide.... So if you want to change to 1700 pulley have to change belt. But can easily reuse your belt and pulley from spoke rim to cast wheel

[tovarman2]

Beautiful. Saw one ( rear 1700 wheel) on EBay but they are asking a bit of money for it.