Custom Roadstar for sale. $3,800 Located in Tucson, Az.
This is a custom built motorcycle. Built by a experinced craftsman and motorcycle enthusiest and ex motorcycle mechanic.
This motorcycle has a 1700cc Yamaha engine made in 2004.
I have eliminated the AIS and also the middle drive box.
The frame is a Cycleonemanufacturing frame. It has 34º rake- no flop. Frame was powdercoated for long life.
The front wheel is 40 spoke and rear 60 spoke wheel with brand new Avon tires rated for 130 mph.
The exhaust is a new Vance & Hines short shot exhaust with full length heat sheilds!
Dynatec 3000 electronic programable ignition.
It has a stock wiring harness that is mostly plug and play.
Springer front forks are stock Harley Davidson 22” Sportser length.
All idiot lights are built into the speedometer.
It has a Le Pera seat style 304L. Good back support.
Stock carburator and jets are ...#40 idle jet, and 172.5 main jet. Barons jet kit. Barons slide needle set on 4th groove down from top. Barons PMS easy adjust screw. PMS open 3 turns.
Custom 9 inch steel rear fender. Led Sled Customs. 10ga. steel.
The gas tank is from Paucho and is a #810 model Mustang style 3 gallon tank.
Billet Proof Designs rear brake caliper mount. 4 piston rear caliper.
DNA front caliper mount. Front brake is Ultima 4 piston caliper.
The engine with oil tank hold 4 qts. of oil. It is wet sump AND dry sump system. 4 qts. total.
Diamond chain 109 links.
Flanders #12 clubman handlebars.
Dynatek coils and wires.
#417 Pro Grips.
Barnett clutch lifter plate with multiple springs.
Carbon fiber clutch plates. 2 part epoxy paint. Custom Dynamics ” all in one rear lights” with license plate.
I will accept cash only.
There are extras. custom bobber spring seat with choice of springs.
Workshop manual.
4 its of oil and a filter.
I also have a nice trailer if you need one.
Mine is brand new and is only $800. I paid $1200 last year.

This is a custom built motorcycle. Built by a experinced craftsman and motorcycle enthusiest and ex motorcycle mechanic.
This motorcycle has a 1700cc Yamaha engine made in 2004.
I have eliminated the AIS and also the middle drive box.
The frame is a Cycleonemanufacturing frame. It has 34º rake- no flop. Frame was powdercoated for long life.
The front wheel is 40 spoke and rear 60 spoke wheel with brand new Avon tires rated for 130 mph.
The exhaust is a new Vance & Hines short shot exhaust with full length heat sheilds!
Dynatec 3000 electronic programable ignition.
It has a stock wiring harness that is mostly plug and play.
Springer front forks are stock Harley Davidson 22” Sportser length.
All idiot lights are built into the speedometer.
It has a Le Pera seat style 304L. Good back support.
Stock carburator and jets are ...#40 idle jet, and 172.5 main jet. Barons jet kit. Barons slide needle set on 4th groove down from top. Barons PMS easy adjust screw. PMS open 3 turns.
Custom 9 inch steel rear fender. Led Sled Customs. 10ga. steel.
The gas tank is from Paucho and is a #810 model Mustang style 3 gallon tank.
Billet Proof Designs rear brake caliper mount. 4 piston rear caliper.
DNA front caliper mount. Front brake is Ultima 4 piston caliper.
The engine with oil tank hold 4 qts. of oil. It is wet sump AND dry sump system. 4 qts. total.
Diamond chain 109 links.
Flanders #12 clubman handlebars.
Dynatek coils and wires.
#417 Pro Grips.
Barnett clutch lifter plate with multiple springs.
Carbon fiber clutch plates. 2 part epoxy paint. Custom Dynamics ” all in one rear lights” with license plate.
I will accept cash only.
There are extras. custom bobber spring seat with choice of springs.
Workshop manual.
4 its of oil and a filter.
I also have a nice trailer if you need one.
Mine is brand new and is only $800. I paid $1200 last year.
Comment