front wheel spacers for hd wheels 1inch or 25mm

[Smokescreens]

The bolts need to be 10 mm longer. And the caliper spacers technically need to be 9/32 of a inch thick. However if you have a floating caliper you can get away with the 1/4 inch thick spacers.

[jrbk]

Smokescreens, so I would need to get the 1/4" spacers for the calipers. Would I also need to get longer bolts? If so, do you know how long they should be? Thank you.

[jrbk]

Thank you Smokescreens! That is very helpful.

[Smokescreens]

The enforcer wheel uses 25mm bearings. You absolutely can use the abs bearing. However if you ever replace that bearing (the one with the olive green dust shield) you must replace it with another abs bearing. Its a different thickness than a non abs bearing. Also due to price increases in shipping and material they are now $95 shipped in the USA.

[jrbk]

adapters that center a hd front wheel as well as adapt the axle to fit the 1 inch or 25mm bearings. turned from 304 stainless steel so you will never need to worry about rust or corrosion.

you only need to tell me if you want 1inch or 25mm style adapters. $75

as for your wheel you want 11.8" rotors and will need to space the calipers as needed and raise your front fender if using a 21" wheel

I just picked up a 19" enforcer with ABS bearings. Can I use it with ABS bearings or do I need to replace? Also: 1inch or 25mm - is that the ID of the hub on the enforcer (OD of the spacer that inserts into the wheel)? Thank you.

[Sasquatch]

I'm interested in purchasing a set of spacers.

[Smokescreens]

Are you talking about the tube between the bearings themselves or between the ends of my adapters?

[Starrider]

Put a19 inch enforcer wheel on my roadie ...11.8 rotors ..25 mm spacers...all works great...question is ..no one said anything about the spacer inside the wheel..no goons ride on center of bearring to well...something to think about or just let it ride

[Seanjarvis]

I’m looking for a set of 1 inch spacer for my 21 enforcer wheel to put on my 06 roadstar

[79280z]

Great i will pm you. The wheels have 1 inch bearings

[Smokescreens]

i prefer paypal. if you have that you can pm me your email. also i need to know if your harley wheel will have 1 inch or 25mm bearings.

[79280z]

Yes 21 is the front. How can i purchase your adaptors?

[Smokescreens]

you can just cut the nuts off the inside of the fender and re drill the holes in the stock fender. no kit needed. for the front you will also need to space in your calipers 9/32" and get 10mm longer bolts for the calipers.

i assume you only meant you want to run a 21" in the front?

[79280z]

I would like a set of these. I am looking to put a set of HD 21in 3.5in spoke wheels onto my 2005 road star. Would i need anything else? I also am looking for fender risers for this same set up. Do i even need risers?

[Smokescreens]

i make them to order. i will send you a pm to arrange payment.

[zulater1990]

I would like to purchase 1” spacers if you have some available

[Smokescreens]

pm replied.

[Knotty2003]

I would like to order some spacers for a 25 mm Harley bearing please

[Smokescreens]

i prefer paypal for payment. i will pm you so we can figure out the payment method.

[Renpo6]

sounds good how can i order a set ?
Im in NC 28213