front wheel spacers for hd wheels 1inch or 25mm

[Smokescreens]

adapters that center a hd front wheel as well as adapt the axle to fit the 1 inch or 25mm bearings. turned from 304 stainless steel so you will never need to worry about rust or corrosion.

you only need to tell me if you want 1inch or 25mm style adapters. $75

as for your wheel you want 11.8" rotors and will need to space the calipers as needed and raise your front fender if using a 21" wheel

[Madeinjapan]

something to keep in mind...

[5StarRoadie]

Do yo make caliper spacers?

[Smokescreens]

Do yo make caliper spacers?

I can but it would be far easier and cheaper for you to get the spacers from a hardware store. You need to move them in roughly about 1/4 of a inch

[Smokescreens]

I have one set of 1" adapters ready to hit the mailbox for any that are interested.

[Kobra101]

I believe i bought spacers from you years back and never got around to installing them on my old bike. Now that i have my roadstar i will definitley be doing the front 21" conversion ill post a pic of them tomorrow if theyre not what i need ill order a new set from you

[Smokescreens]

Ok sounds good

[Kobra101]

Hey smoke looks like I found them! This is what I have if I need anything else please let me know, I’m having great difficulty finding the wheel swap diy from back in the day I know I needed these spacers a Harley 21” x 3.5 front wheel spacers for the caliper but what about the single disc conversion?

[Kobra101]

[Smokescreens]

not positive if they are mine or not however, you want 11.8" rotor(s) and you will need to space out the caliper as needed. if you are going single disk brakes i would give good thought on a 13" disk conversion. Brian Veney sells a nice one that converts to a 13" disk made for a harley caliper. i would go with a 13" 6 piston caliper. but you can just run a single 11.8" but be ready to lose stopping power either way.

what wheel are you going to be running?

[Kobra101]

Black Ultima 60 Spoke Billet 21" x 3.5" Single Disc Front Wheel for Harley and Customs

Part # 36-653

1" sealed bearings installed.

Uses 2000 & later Rotors.

Single disc.

Billet hub.

Black hub and rim, Chrome spokes.


those are the wheel specs i was trying to get out as in expensive as i can

[Kobra101]

how can i run that single 11.8 stock rotor for the time being?

[Smokescreens]

You will need a single brake line. You can go from the master to the caliper or just replace the lower line. Please make sure you have at least a 4 piston caliper. The 04 and up roadies allready have them.

[Kobra101]

ok thank you very much for the guidance i really appreciate it thank you!!

[Bsimpson]

Will these adapters work on a stratoliner deluxe?

[Smokescreens]

I dont see why not. A strat front wheel bolts right up to a road star so it should be the same.

[bignasty05]

Just wanted to throw this out there but, I bought some adapters from smokescreens about 6 months ago, ive got well over 800 miles on them, top quality stuff.

[Smokescreens]

Happy to hear you like my work

[Kingofdacoast]

Would like to purchase a axle and spacers

[Smokescreens]

no problem. i will send you a pm