Roadstar warrior front wheel

[Abencomo8]

So I ended up with a warrior front wheel ... And I want to put it on my 07 regular roadstar ...has anyone else done this

[Abencomo8]

what Im looking for is some insight ... from my preliminary measurements... it looks like a 2 inch difference ... so spit in half would mean 1 inch spacers on either side ... and then what about the brake calipers? could I space them in toward the wheel or should I space the rotors out ... and again for the rotors and calipers it looks to be about a 2 inch total difference ... which would mean 1 inch on either side ... does this sound right?

[Jaybo]

Smokescreens would be a good person to ask, typical is Strat or roadliner wheels as well as HD wheels with spacers. Hopefully he will see this post this evening.

Oh and From Airlie, Oregon!

[roadiemort]

http://roadstarclinic.com/component/...,61/id,448595/

[Abencomo8]

I read through that thread ... And its focus is more on the rear wheel ... The front wheel is what I'm talking about ... Is says the bearings are the same and that's true but the hub is 2 inches narrower than the stock roadie wheel ... Looking for the best way to make up that space and get the rotors and calipers to all line up

[davej]

Contact Smokescreens I know he makes spacers for HD wheels. I'm sure he can hook you up with something with the proper measurements if you provide them to him.