Clutch shortcut s

[brianmac]

Okay I did my second clutch on a Roadstar the biggest pain in the ass is getting a square two wire for the pickup down through the road star hole. That hole under the battery where the wires go through where shit gets lost and square stuff doesn't go through easily. Take a pair of dykes and cut off the unnecessary part of the square connector and a razor to make it smooth on the edges and corners, and a piece of tape around it and it shoots right through. On the way back up after you're done, use a pizza 14 bare copper feed it down through the hole there's a place on the connector where you can feed it through, and make it perfect 1/8 inch 90° elbow to hold it. Shebang. Also when removing the clutch cover gasket I found the judiciency of a heat gun in front of your blade works wonders. Be careful not to melt anything. .