Reprinted by permission from Mr. Tidy's tech tips
Mikuni / Dynojet Jets
Mikuni Dynojet
140 149.3
Flow rates based on size markings of Mikuni and DynoJet jets are not comparable ..
As a guide .. the chart to the left indicates equivalent sizes based on the diameterof hole in the jet.

Mikuni jets are chamfered on the inside opening at the threaded end and Dynojets have a machined flat surface. Keep this in mind when using this chart. These physical differences will never allow an exact comparison.

This chart is intended to be used as a tool to assist you in making a more accurate decision when selecting a jet size range or comparing tuning data where an opposing brand is being used. Actual jet sizes are highlighted.
DynoJet jets are marked according to the diameter of the hole in thejet .. ie: DJ150 = 1.5mm and DJ175 = 1.75mm.
This is not true for Mikuni or most other OEM equivalent jets. This size Mikuni jet, (N102.221 Super BN), is marked according to its' flow rate, ie: 150 = a rating of 150 cc of fuel per minute.
150
142.5 152.0
145 154.7
155
147.5 157.3
150 160
152.5 162.7
165
155 165.3
157.5 168.0
170
160 170.7
162.5 173.3
175
165 176.0
167.5 178.7
180
170 181.3
172.5 184.0
185
175 186.7
177.5 189.3
190
180 192.0
182.5 194.7
195
185 197.3
187.5 200
190 202.7