• ---

  Apply 3M Protective Film On The Road Star Fuel Tank

  • Created by: Tykes_Place
  • Published: 02-16-2018, 12:06 PM
  • 0 comments

  Apply 3M Protective Film On The Road Star Fuel Tank

  Reprinted by Permission from Mr Tidy's Tech Tips
  
  
  
  
  
  Below are the scans Jeff has provided, he also has stated that the 2000 might have a different Pinstripe layout than the 99' does These are for the 1999' Road Star You might have to modify these for a 2000 model
  Important
  Check and make sure the patterns
  fit your pinstripe theme before you
  start cutting your 3M Film
  
  Left-side pattern
  
  Right- side pattern
  ...

  Go to post

  Last edited by Tykes_Place; 02-16-2018, 12:13 AM.

• ---

  Removing the Roadstar gas tank

  • Created by: Tykes_Place
  • Published: 02-16-2018, 12:23 AM
  • 0 comments

  Removing the Roadstar gas tank

  Reprinted by Permission from NoPork.com
  
  
  One rider tells how he removed the tank on his Roadstar.
  
  The tank is pretty easy to remove... The hardest part of removing it was unplugging one of the meter assembly coupler plugs.
  
  The "meter assembly" is a fancy name for the chrome piece on top of your tank that holds the spedometer. First, you remove the 3 hex bolts from the meter assembly. If you don't have a windshield, you can probably just flip...

  Go to post

• ---

  How to get rid of the rattle in the tank

  • Created by: Tykes_Place
  • Published: 02-16-2018, 12:20 AM
  • 1 comment

  How to get rid of the rattle in the tank

  Reprinted by Permission from Fatbike
  
  Ixnay the Attleray
  
  If your like most of us you've noticed right away that the gas tank seems to rattle from the rear of the tank.
  Although there are many fixes out there, some may cause problems later.
  In an effort to keep the stock mounting parts stock the following fix is suggested:
  
  Simply remove the nut from the long bolt that holds the tank to the frame. (Located at the rear of the tank. Remove the seat and...

  Go to post